NEC DSX Software Manual

PC Program (System Administrator)
272 ◆ Features DSX Software Manual
PC Program (System Administrator)
Description
The PC Program is a Windows
TM
-based application you can use for programming the telephone
system and maintaining site databases, instead of using the conventional telephone programming.
The PC Program provides:
● On-Line Programming (Direct Connection)
With the PC connected to the telephone system’s serial USB, or Ethernet port, you can make
immediate changes to the telephone system programming. While connected, the PC Program
also allows you to save your new data to a file on the PC hard disk, or upload a “template”
database from your PC to the system.
● Remote Programming
Using an IP or modem connection between your PC and the remote system, you can custom-
ize a customer’s system without leaving your office. Specify what is required for IP and
modem connections.
● Off-Line Programming
With Off-Line Programming, the PC Program allows you to set up a database on your PC off
line, connect to the telephone system, and upload the entire custom configuration.
● Database Save and Restore
Use the PC Program to save a site’s data to your PC hard disk. You can easily restore the saved
data later on, if required.
The PC Program has the following requirements:
● Windows NT, 2000, XP and above.
● P330 with 128 MB RAM.
● 256 color 800 x 600 display (1240 x 1024 optimal).
● Do not use large fonts.
● 40 mBytes of available hard disk space.
Use your PC or laptop to program the system remotely or while on-site.

NEC DSX Specifications