Call Forwarding
DSX Software Manual Features ◆ 45
Features
Call Forwarding Toggle in a Personal Speed Dial Bin
If an extension doesn’t have an available Feature Key for a Call Forwarding key, the user can program a Per-
sonal Speed Dial bin for similar operation (without the BLF). To do this:
❥ While on hook, dial #77.
❥ Press the key for the Personal Speed Dial bin you want to program + HOLD.
❥ For LINE/GRP/ICM, press INTERCOM + HOLD.
❥ For NUM, dial *3 + HOLD.
❥ For NA, enter a name of your choosing + HOLD.
❥ Press SPEAKER to exit.
While the extension is idle, pressing the bin key puts the extension in the Call Forwarding programming
mode - the same as pressing INTERCOM and dialing *3.
❥ If the extension has Call Forwarding enabled, and the user presses the bin key and waits (for at least 6
seconds), Call Forwarding is automatically cancelled.
❥ If the extension has Call Forwarding disabled, and the user presses the bin key and waits (for at least 6
seconds), the prior Call Forwarding mode is automatically enabled (if any).
Call Forwarding Confirmation Tone
Keyset users will hear a single confirmation beep after enabling or cancelling Call Forwarding. Single line
telephone users will hear Intercom dial tone after enabling or cancelling Call Forwarding.
To Next Page
Loading...
