NEC DSX - 1111-04: Speed Dial DTMF Tone off

11xx-CPU
111x-Tones
1111-DTMF Setup
610 ◆ System Options: 1001-1702 DSX Software Manual
1111-04: Speed Dial DTMF Tone Off
(SPD DTMF Off)
Use this option to set the duration the quiet time between DTMF digits for Speed Dial outside calls automat-
ically dialed by the system. Set this timer for compatibility with the connected telco or PBX/Centrex. If you
set this interval too short, the telco or PBX/Centrex may not be able to set up to receive the next DTMF digit.
If too long, outbound dialing is unnecessarily slowed down.
Features
• Central Office Calls, Placing (page 78)
IntraMail Features
• None
Options
• 10-2550 mS
Default
• 100 mS