NEC DSX - User Programmable Feature

Line Keys
DSX Software Manual Features ◆ 229
Features
Operation
User Programmable Feature
Using your Line Keys
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place a call using a line key:
1.
Lift the handset.
2.
Press the line key.
3.
Dial the outside number.
To answer an incoming call using a line key.
1.
Listen for ringing and look for the flashing line key.
• Line keys that flash red are for you and your co-workers.
• Line keys that flash green are just for you (such as DILs and transfers).
2.
Lift the handset.
3.
Press the flashing line key.
• If you have Ringing Line Preference, lifting the handset answers the call.
• If you have Automatic Handsfree, while on a call you can press another line key to put your first call on Hold.
Setting Line Key Ringing
Feature Mnemonic Operation Access Level
Line Keys
#RA (#72)
#RAL
+ Line key repeatedly to select ringing mode +
SPEAKER to exit.
• Line keys flash as follows:
- Lamp only = On red
- Immediate ring = On green
- Delay ring = Fast flash green
- Night ring = Slow flash green
2-5