NEC DSX - 1502-01: Operator Number 1; 1502-02: Operator Number 2; 1502-03: Operator Number 3; 1502-Assignments

15xx-Options
150x-Operators
1502-Assignments
DSX Software Manual System Options: 1001-1702 ◆ 653
System
1001-1702
1502-Assignments
Description
Use this program to assign the system’s operator extensions. If you enabled more than one operator in 1501-
01: Number of Operators (page 652), all four of the following options are available. However, only the num-
ber you specified in 1501-01: Number of Operators will function.
Options
1502-01: Operator Number 1
(Operator 1)
Assign the first operator’s extension number. Be sure you have entered the correct number of operators in
1501-01: Number of Operators (page 652).
Features
• Attendant Position (page 24)
IntraMail Features
• None
Options
• Extension number
• None (Entered by pressing CLEAR)
Default
• 300
1502-02: Operator Number 2
(Operator 2)
Assign the second operator’s extension number. Be sure you have entered the correct number of operators in
1501-01: Number of Operators (page 652).
Features
• Attendant Position (page 24)
IntraMail Features
• None
Options
• Extension number
• None (Entered by pressing CLEAR)
Default
• None
1502-03: Operator Number 3
(Operator 3)
Assign the third operator’s extension number. Be sure you have entered the correct number of operators in
1501-01: Number of Operators (page 652).
Features
• Attendant Position (page 24)
IntraMail Features
• None
Options
• Extension number
• None (Entered by pressing CLEAR)