NEC DSX Software Manual

42xx-IntraMail
422x-Routing Mailbox
4222-Routing Options
DSX Software Manual Voice Mail Options: 4101-4231 ◆ 891
Voice Mail
4101-4231
4222-Routing Options
Description
Use this program to set the routing options for each Call Routing Mailbox. The entries you make in this pro-
gram are valid only if the Routing Mailbox is assigned as a Call Routing Mailbox (1) in 4221-01: Routing
Mailbox Type.
Options
4222-01: Dial Action Table
(Dial Action Table)
Use this option to assign the Dial Action Table to the Call Routing Mailbox. The Dial Action Table defines
the dialing options for the call Routing Mailbox.
Features
• None
IntraMail Features
• Call Routing Mailbox (page 450)
• Centrex Transfer (page 460)
• Dial Action Table (page 465)
• External Transfer (page 483)
Options
• 1-16 (Dial Action Table 1-16)
Default
• 1
4222-02: Time Limit for Dialing Commands
(Dialing Timeout)
This option determines how long IntraMail will wait for an Automated Attendant caller who doesn’t dial
before routing the call to the Timeout destination. Be sure your Dial Action Tables have a Timeout action
programmed.
If the caller waits too long to dial:
• When the associated Dial Action Table has a Timeout action, the caller routes to that destination.
• When the associated Dial Action Table does not have a Timeout action programmed, the Instruction
Menu repeats 3 times and then IntraMail hangs up.
Features
• None
IntraMail Features
• Call Routing Mailbox (page 450)
• Dial Action Table (page 465)
Options
• 1-99 seconds
• 0 causes the Automated Attendant to immediately route callers to the Timeout destination.
Default
• 5
4222-03: Screened Transfer Timeout
(STRF Timeout)
Use this option to set how long a Screened Transfer (STRF) from the Automated Attendant will ring an

NEC DSX Specifications