NEC DSX - 1401-08: Receive DID Calls

14xx-COS (Class of Service)
140x-Station
1401-Features
630 ◆ System Options: 1001-1702 DSX Software Manual
Default
• No (0) - Disabled
1401-08: Receive DID Calls
(Allow DID Calls)
Use this option to enable or disable the extension’s ability to receive DID calls. If enabled, the extension will
receive DID calls routed to it by the system. If disabled, the extension will not receive DID calls. If a DID
call attempts to route to an extension with this option disabled, the call follows Line Overflow.
Features
• Direct Inward Dialing (page 99)
IntraMail Features
• None
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• Yes (1) - Enable