NEC DSX Software Manual

System Reinitialization
DSX Software Manual IntraMail Features ◆ 579
IntraMail
Features
System Reinitialization
Description
Initializing the telephone system automatically initializes all IntraMail programming. You may want to do
this if the site requirements significantly change and it is easier to start over from default than remove all
your custom programming. Reinitializing returns all programmed options to their default values.
To initialize (erase) Subscriber Mailbox Security Codes and all recordings, use a System Administrator Mailbox.
Conditions
• None
Default Setting
• N/A
Programming
1. Press INTERCOM and dial #*#* + NECDSX + HOLD.
2. Dial 9011 + HOLD.
3. Dial 1 (for yes) + HOLD.
- The telephone system data base initializes.
- To cancel initialization, dial 0 + HOLD instead.
1. See System Administrator (page 576).
- The recorded messages include:
Instruction Menus
Announcement Mailbox messages
Messages left in a Subscriber Mailbox
Subscriber Mailbox greetings
Subscriber Mailbox names
Other Related Features
Features
None
IntraMail Features
System Administrator (page 576)
The System Administrator can delete Subscriber Mailbox security codes as well as IntraMail recorded
messages.
Operation
N/A
Reinitializing IntraMail returns all programmed options to their default values.
Reinitializing the telephone system returns all programmed options to
their factory set (default) values. Any site specific programming
you have done will be erased following reinitialization.
1. To reinitialize the telephone system data base:
2. To erase recorded messages and Subscriber Mailbox Security Codes:

NEC DSX Specifications