NEC DSX Software Manual

31xx-Configuration
314x-TIE Line
3143-Group Access
832 ◆ Line Options: 3101-3714 DSX Software Manual
3143-Group Access
Description
Use this program to set the tie line outbound Line Group access.
If programming multiple lines, you may find 9022-Line Copy (page 923) a handy time-saving tool.
Options
3143-[01-64]: Tie Line Caller’s Outbound Line Group Access
(xx Group xx Access)
Use this option to enable or disable the extension’s outgoing access to each Line Group (90-98).
Use this option to enable or disable Line Group Access for incoming (remote) Tie Line callers. If enabled for
a Line Group, remote Tie Line callers will be able to use that group in the local system for outgoing calls.
You separately enable this option for each of the 9 Line Groups (90-98). The access matrix you set up in
3142-[01-64]: Tie Line Caller’s Outbound Line Access may limit which lines Line Group Access can use.
Features
• Tie Lines (page 344)
IntraMail Features
• None
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• Yes (1) - Enabled

NEC DSX Specifications