NEC DSX Software Manual

21xx-Configuration
211x-Options
2115-Hunting and Overflow Options
748 ◆ Station Options: 2101-2501 DSX Software Manual
2115-02: DID Station Intercept Type
(DID Intercept Type)
Use this option to set the extension’s DID Intercept type. Intercept can occur when the extension is busy, in
Do Not Disturb, or unanswered.
Features
• Direct Inward Dialing (page 99)
IntraMail Features
• None
Options
• 0 for none
• 1 for Busy/DND
- DID Intercept occurs when the extension is busy or in Do Not Disturb.
• 2 for Ring No Answer
- DID Intercept occurs when the extension is unanswered.
•
3 for Busy/DND and Ring No Answer
- DID Intercept occurs when the extension is busy, in Do Not Disturb, or is unanswered.
Default
• 0
2115-02: DID Station Intercept Destination
(DID Intercept Destination)
Use this option to set the extension’s DID Intercept destination. When DID Intercept occurs, the incoming
DID call routes to the destination specified in this option. The destination can be an extension, a UCD or
Ring Group master number, or the voice mail master number.
For Ring No Answer Intercept, intercept occurs after the 1601-02: DIL No Answer Timer interval. If the call
is not picked up at the intercept destination (or intercept is not programmed to pick up the call), the call fol-
lows the line overflow routing.
Features
• Direct Inward Dialing (page 99)
IntraMail Features
• None
Options
• Extension number (0-999)
• UCD Group master number (700-707)
• Voice Mail master number (700)
• Ring Group master number (600-607)
Default
• 300

NEC DSX Specifications