14xx-COS (Class of Service)
140x-Station
1403-SLT’s (Single Line Telephone Options)
636 ◆ System Options: 1001-1702 DSX Software Manual
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• No (0) - Disabled
1403-04: High Voltage Message Waiting Lamp for Single Line Set
(HV MW Lamp)
Use this option to enable or disable High Voltage Message Waiting for single line ports. High Voltage Mes-
sage Waiting is not available in DSX-40. If both this option and 1403-05: FSK Message Waiting Lamp for
Single Line Set are enabled, the system uses FSK Message Waiting.
Features
• Message Waiting (page 238)
IntraMail Features
• None
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• No (0) - Disabled
1403-05: FSK Message Waiting Lamp for Single Line Set
(FSK MW Lamp)
Use this option to enable or disable FSK Message Waiting for single line ports. If both this option and
1403-04:
High Voltage Message Waiting Lamp for Single Line Set
are enabled, the system uses FSK Message Waiting.
Features
• Message Waiting (page 238)
IntraMail Features
• None
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• No (0) - Disabled
1403-06: Loop Disconnect for Single Line Set
(Loop Disconnect)
Use this option to enable or disable the ability of the system to send a loop supervision disconnect signal
(i.e., drop pulse) to single line ports. Set this option for compatibility with the connected SLT device. (This
option is always disabled for Voice Mail ports.)
Features
• Line Group Routing (page 223)
IntraMail Features
• None
Options
• No (0) - Disabled
• Yes (1) - Enabled
Default
• No (0) - Disabled
To Next Page
Loading...
