NEC DSX - Message Waiting Lamp

Message Waiting Lamp
DSX Software Manual IntraMail Features ◆ 549
IntraMail
Features
Message Waiting Lamp
Description
An extension’s Ring/Message Lamp flashes on the telephone to indicate that the user has new messages
waiting in their mailbox. Once IntraMail is properly installed and programmed, telephone Ring/Message
Lamp operation is automatic. The Ring/Message Lamp will flash fast (red) when there are new messages in
the extension user’s mailbox, providing a visual reminder of new messages. The subscriber does not have to
call their mailbox and listen to the voice prompts to find out when they have new messages.
Conditions
• None
Default Setting
• Enabled
Programming
1. To turn lamping on, in 2143-04: Message Waiting Lamp (page 771) enter Yes.
2. To turn lamping off, in 2143-04: Message Waiting Lamp (page 771) enter No.
- If Message Waiting lamping is disabled (N), Message Notification will not function.
- In addition, the V-MAIL [VM] soft key will not show the number of new messages.
Other Related Features
Features
None
IntraMail Features
Call Screening (page 453)
The
V-MAIL LED is used for Call Screening only.
Operation
N/A
The Ring/Message Lamp flashes when the user has new messages waiting in their mailbox.
1. Turn Message Waiting lamping for Subscriber Mailboxes on or off.