NEC DSX Software Manual

Barge In (Intrusion)
36 ◆ Features DSX Software Manual
Barge In (Intrusion)
Description
Barge In permits an extension user to break into another extension user’s established call. This sets up a
three-way conversation between the intruding extension and the two parties on the initial call. The user can
Barge In on an Intercom call or outside call.
Conditions
• Barge In uses a system Conference circuit. See Conference (page 89) for more.
Default Setting
• Disabled
Programming
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. To enable, in 1402-02: Barge In (Intrusion) (page 633) enter Yes.
3. To disable, in 1402-02: Barge In (Intrusion) (page 633) enter No.
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. To block Barge In attempts, in 1401-03: Privacy (page 628) enter Yes.
3. To allow Barge In attempts, in 1401-03: Privacy (page 628) enter No.
Other Related Features
Features
Attendant Position (page 24)
Since the attendant is never busy, Intercom callers cannot Barge In on an attendant.
Conference (page 89)
An extension user can Barge In on a Conference.
Forced Line Disconnect (page 182)
As an alternative to Barging In, disconnect the line instead.
Privacy (page 277)
Privacy blocks Barge In attempts.
IntraMail Features
None
In an emergency, use Barge In to get through to a co-worker right away.
CAUTION
Unauthorized intrusion on calls using this feature may be interpreted as an
invasion of privacy.
1. Enable or disable an extension’s ability to Barge In on a co-worker’s call.
2. Should the called extension be able to block Barge In attempts?

NEC DSX Specifications