NEC DSX - 2103-04: Stations Intercom Ring Tone; 2103-05: Stations Ring Group Ring Tone; 2103-06: Stations Recall Ring Tone

21xx-Configuration
210x-Setup
2103-Ringing
DSX Software Manual Station Options: 2101-2501 ◆ 727
Station
2101-2501
you make in this option will take effect. If this option is 1-3, the setting you make in this option will only
take effect if 1405-02: Station Ring Override (page 641) is also enabled.
Features
• Distinctive Ringing (page 135)
IntraMail Features
• None
Options
• 0 for line (follows the setting for the line in 3113-03: Night Ring Type)
• 1 for ring type A
• 2 for ring type B
•
3 for ring type C
Default
• 0
2103-04: Station’s Intercom Ring Tone
(ICM Ring Tone)
For the station’s incoming Intercom ringing, use this option to select the Distinctive Ringing ring tone used.
Features
• Distinctive Ringing (page 135)
IntraMail Features
• None
Options
• 0-9 for ring tones 0-9.
Default
• 1
2103-05: Station’s Ring Group Ring Tone
(Group Ring Tone)
For the station’s incoming Ring Group ringing, use this option to select the Distinctive Ringing ring tone used.
Features
• Distinctive Ringing (page 135)
IntraMail Features
• None
Options
• 0-9 for ring tones 0-9.
Default
• 1
2103-06: Station’s Recall Ring Tone
(Recall Ring Tone)
For the station’s incoming recall ringing, use this option to select the Distinctive Ringing ring tone used.
Features
• Distinctive Ringing (page 135)
IntraMail Features
• None
Options
• 0-9 for ring tones 0-9.