NEC DSX Software Manual

Toll Restriction
354 ◆ Features DSX Software Manual
Programming
Basic Setup
1. In 3501-01: Toll Restriction Country Type (page 839), set the Toll Restriction Country Type.
- For systems installed in North America, you should select US Domestic (1).
1. In 2102-02: Station Toll Level (Day) (page 724) and 2102-03: Station Toll Level (Night) (page 724),
assign a Toll Restriction level to an extension.
1. If yes, in 3511-01: Active Key Pad (page 840) enter Yes.
2. If no, in 3511-01: Active Key Pad (page 840) enter No.
1. If yes, in 3512-04: Allow N11 Dialing (page 842) enter Yes.
2. If no, in 3512-04: Allow N11 Dialing (page 842) enter No.
1. If yes, in 3512-01: Allow 0 + XXX Operator Assisted Dialing (page 841) enter Yes.
2. If no, in 3512-01: Allow 0 + XXX Operator Assisted Dialing (page 841) enter No.
1. If yes, in 3512-02: Allow 011 + XXX International Dialing (page 841) enter Yes.
2. If no, in 3512-02: Allow 011 + XXX International Dialing (page 841) enter No.
Equal Access Dialing Restrictions
1. If yes, in 3512-03: Allow 101x Equal Access Dialing (page 841) enter Yes.
2. If no, in 3512-03: Allow 101x Equal Access Dialing (page 841) enter No.
1. If yes, in 352x-1010-XXX / Local XXX (Equal Access Dialing) (page 844) set up the Equal Access dial-
ing Table.
- Be sure to initialize the table before programming it for the first time.
- You can make the table a deny table and enter just the codes you want to restrict, or
- You can make the table an allow table and enter just the codes you want to allow.
- By default, this type of dialing is allowed because the table is a deny table with no entries (i.e., it
denies nothing).
1. To set up Toll Restriction Tables prior to programming:
2. Assign a Toll Restriction level to an extension.
3. Do you want to enable Active Key Pad (Continuous Dialing)?
4. Do you want to enable N11 dialing?
5. Do you want to enable 0+ (Operator Assisted) dialing?
6. Do you want to enable International (011) dialing?
1. Do you want to enable the dialing of Equal Access Codes 1011 through 1019?
2. Do you want to allow Equal Access 1010 + XXX dialing?

NEC DSX Specifications