NEC DSX - Page 142

Direct Inward Line
112 ◆ Features DSX Software Manual
Setting Up Line and Loop Keys
1. For line keys:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 03.
- In 2121-[01 to 24]: Feature Key Data (page 758), enter the DIL line number (1-64).
- If an extension doesn’t have any line keys, you should assign Fixed or Switched Loop keys to
make handling outside calls easier.
2. For Fixed Loop keys:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 01.
3. For Switched Loop keys:
- In 2121-[01 to 24]: Feature Key Codes (page 758), enter 02.
- In 2121-[01 to 24]: Feature Key Data (page 758), enter the number of the Line Group to which the
DIL belongs (90-98).
1. For line keys:
- In 2402-[01-60]: DSS Console Key Codes (page 801), enter 03.
- In 2402-[01-60]: DSS Console Key Data (page 801), enter the DIL line number (1-64).
- Loop keys are not available on a DSS Console.
1. Set up line or loop key for the DIL.
2. Set up line keys for a DSS Console.