NEC DSX Software Manual

Direct Line Access
116 ◆ Features DSX Software Manual
Operation
Using Direct Line Access
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place a call over a specific line using Direct Line Access:
1.
Lift the handset.
2.
Press INTERCOM.
3.
Dial 1 plus the line number (e.g., 01 for line 1).
• If you hear busy tone, you may be able to dial 2 to queue for the line. See Line Queuing / Line Callback
(page 230) for more.
4.
Dial the outside number.

NEC DSX Specifications