NEC DSX Software Manual

Door Box
DSX Software Manual Features ◆ 151
Features
Transfer (page 358)
An extension user cannot Transfer a call to a Door Box.
IntraMail Features
None
Operation
Calling from the Door Box
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place a call from the Door Box:
1.
Press the Door Box call button.
2.
When someone inside the building answers your call, speak toward the Door Box.
• Once you press the call button, you can not control the call. You must wait for someone to answer.
Calling to the Door Box
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place a call to the Door Box from a keyset:
1.
Lift handset and press INTERCOM.
• At a single line set, just lift the handset.
2.
Dial the Door Box extension number.
• You hear two beeps, then conversation with the visitor at the door.
Answering Door Box Chimes
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To answer Door Box chimes or ringing:
1.
Lift the handset.
• Door Box chimes are not available at single line telephones.
Controlling the Door Strike
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To activate the Door Box relay (which in turn controls the door strike):
• Once set up in programming, this option is available to any member of the Door Box Ring Group as well as any
extension with a Call Coverage key for the Door Box Ring Group.
1.
Place or answer a Door Box call.
2.
Do one of the following.
a.
[Open]
[Open]
Select to open the Door Box relay (if closed/activated).
• Alternately press
FLASH.
b.
[Close]
[Close]
Select to close the Door Box relay (if open/deactivated).
• Alternately press
FLASH.
c.
At a single line telephone, hookflash to open or close the Door Box relay,

NEC DSX Specifications