EasyManua.ls Logo

NEC DSX - Page 187

NEC DSX
984 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Extension Hunting
DSX Software Manual Features 157
Features
Programming
Setting Up Circular Hunting
1. In 2115-01: Hunt Type (page 746), assign the hunt type for each extension in the group.
- 1 = Ring No Answer Outside Calls
- 2 = Busy/Ring No Answer Outside Calls
- 3 = Busy/Ring No Answer All Calls
- 4 = Busy Outside Calls
1. In 2115-01: Hunt Destination (page 746), set up the circular hunt routing.
- Each extension should route to the next in the group.
- The last extension should route back to the second. See the Overview of Circular Hunting
(page 154) chart for more.
1. If yes:
- Leave 1601-03: Call Forward No Answer Timer (page 670) and 1603-01: Transfer Recall Timer
(page 675) at their current settings.
2. If no:
- To change how long the rst member of the group rings, adjust 1603-01: Transfer Recall Timer
(page 675) as required.
- To change how long the next and succeeding members of the group ring, adjust 1601-03: Call For-
ward No Answer Timer (page 670) as required.
1. If yes, leave 1601-02: DIL No Answer Timer (page 669) at its current setting.
2. If no, adjust 1601-02: DIL No Answer Timer (page 669) as required.
Setting Up Terminal Hunting
1. In 2115-01: Hunt Type (page 746), assign the hunt type for each extension in the group.
- 1 = Ring No Answer Outside Calls
-
2 = Busy/Ring No Answer Outside Calls
- 3 = Busy/Ring No Answer All Calls
-
4 = Busy Outside Calls
1. In 2115-01: Hunt Destination (page 746), set up the terminal hunt routing.
- Each extension (except the last) should route to the next in the group.
- For the last extension, press CLEAR to undene the hunt assignment.
1. Assign the hunt type to each extension in a Circular Hunting Group?
2. Set up the hunt destination routing.
3. Do calls ring a hunt group member for the correct interval before routing to the next extension?
4. Do DILs ring a hunt group member for the correct interval before routing to the next extension?
1. Assign the hunt type to each extension in a Terminal Hunting Group?
2. Set up the hunt destination routing.

Table of Contents

Other manuals for NEC DSX

Related product manuals