NEC DSX - Page 211

Flexible Numbering Plan
DSX Software Manual Features ◆ 181
Features
1. If yes:
- In 1301-[01-10]: Function Type (page 620), assign another digit (except 3) to type 2 (extension
access).
- In 1301-[01-10]: Expected Number of Digits (page 620), change the expected digits option for the
new digit to 3.
- In 1311-01: Station Extension Number (page 623), change the extension numbers to use the leading
digit selected above.
2. If no, leave the above options at their default settings.
1. See 9031-Station Swap (page 925).
Other Related Features
Features
Attendant Position (page 24)
Change the digits users dial to reach the system operators (normally 0 or 01-04).
Central Office Calls, Placing (page 78)
Change the digits users dial to access a Line Group for an outside call (normally 90-98).
Direct Line Access (page 115)
Change the digits users dial to directly access an outside line (normally 101-164).
Extension Hunting (page 154)
Change the digits required to reach a UCD Group master number.
Group Ring (page 189)
Change the digits required to reach a Ring Group master number.
Intercom (page 211)
Change the digits users dial to reach co-worker’s over the Intercom (normally 300-427).
IntraMail Features
None
Operation
None
6. Do you want to change the Intercom extension number range?
6. Do you want to swap the extension numbers of two telephones?