Forced Line Disconnect
DSX Software Manual Features ◆ 183
Features
Operation
Using Forced Line Disconnect
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To disconnect a busy line:
1.
Do one of the following.
a.
Press the line key for the busy line.
b.
Press INTERCOM and dial the line’s extension number (e.g., 101 for line 1).
2.
When you hear busy tone, dial # to disconnect the line.
• You hear Intercom dial tone and the line key goes out.
• You can now place a new call on the line.
To Next Page
Loading...
