Group Ring
190 ◆ Features DSX Software Manual
Programming
Basic Programming
1. If yes, in 2113-02: Ring Group (page 738) enter the Ring Group (1-8) to which the extension belongs.
2. If no, in 2113-02: Ring Group (page 738) enter 0.
1. If yes, in 2201-01: Ring Group Name (page 779) enter the Ring Group name.
- The name shows on a keyset user’s display when they call the Ring Group.
2. If no, leave 2201-01: Ring Group Name (page 779) at its default setting.
1. If yes, in 2201-02: Ring Group Incoming Ring Type (page 780) enter the Ring Type.
- 0 = Standard Ring
- 1 = Ring Type A
- 2 = Ring Type B
- 3 = Ring Type C
2. If no, in 2201-02: Ring Group Incoming Ring Type (page 780) enter 0 (Standard Ring).
1. Should an extension be in a Ring Group?
2. Do you want to enter a name for a Ring Group?
3. Should calls into a Ring Group ring members with a distinctive ring?
To Next Page
Loading...
