NEC DSX Software Manual

Last Number Redial
220 ◆ Features DSX Software Manual
Programming
1. In 2131-[01-64]: Line Access (page 763), enter one of the following:
- 2 for outgoing access only
- 3 for full access
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes, in 1411-04: Enhanced Last Number Redial (page 648) enter Yes.
3. If no, in 1411-04: Enhanced Last Number Redial (page 648) enter No.
Other Related Features
Features
Account Codes (page 14) and Save Number Dialed (page 298)
Last Number Redial and Save do not store Account Codes. This means that the user must manually
enter an Account Code to have it included with a call dialed using Last Number Redial and Save.
Auto Redial (page 28)
Auto Redial periodically redials a busy outside number.
Central Office Calls, Placing (page 78)
Users can easily redial the last outside number dialed.
Intercom (page 211)
Last Number Redial cannot redial Intercom calls.
Line Queuing / Line Callback (page 230)
If all lines are busy and Last Number Redial cannot go through, the user can dial 2 a queue for a line
to become free. If the user hangs up, the system converts the queue to a Line Callback.
Save Number Dialed (page 298)
Save also simplifies dialing important numbers.
Single Line Telephones (page 305)
Last Number Redial is not available at single line telephones.
Toll Restriction (page 351)
Last Number Redial will not store a number denied by Toll Restriction.
IntraMail Features
None
1. Enable outgoing access on each line the user should use for Last Number Redial.
2. Should extension be able to use Enhanced Last Number Redial?

NEC DSX Specifications