NEC DSX Software Manual

Last Number Redial
222 ◆ Features DSX Software Manual
3.
The system tries to use the same line as that used for your initial call.
• If that line is busy, the system automatically selects a line from the same group as your initial call.
• If you hear busy tone and your extension has Line Queuing, you can dial 2 to queue for a line to become free.
If you hang up, the system converts the queue to a Line Callback.
- With Line Queuing, the number automatically redials when a line is available.
To erase (clear) all the numbers from your Enhanced Last Number Redial buffer:
1.
Press REDIAL + CLEAR.
2.
Do one of the following:
a.
[YES]
[YES]
Select to clear the buffer.
b.
[NO]
[NO]
Select to exit without clearing the buffer.
Using Enhanced Last Number Redial
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

NEC DSX Specifications