NEC DSX Software Manual

Park
268 ◆ Features DSX Software Manual
Key Ring (page 214)
Unanswered Park recalls divert to Key Ring.
Music on Hold (page 246)
If installed, Music on Hold plays to parked callers.
Off-Hook Signaling (page 255)
An extension user can Park their current call and answer the waiting call.
Voice Mail (page 372)
When an extension user with Ring No Answer/Busy Terminal Hunting to voice mail parks a call at a
co-worker’s extension, the call recalls to them if not picked up. If still unanswered, the call diverts to
Key Ring.
IntraMail Features
None
Operation
Park
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To Park or retrieve a call in System Park Orbit:
1.
Do one of the following.
a.
(Park only)
[Park]
[Park]
Select Park.
• You cannot use this procedure to retrieve a parked call.
[Sys]
[Orbit x]
22-Button and 34-Button Display
• Select System Park + Dial orbit number (0-9).
Super Display
• Select orbit (Orbit 0 - Orbit 9).
b.
• Press TRANSFER and dial *.
• Dial the System Park Orbit (60-69).
c.
Press your Park key.
• Your Park key winks on (green) for calls you Park and is on steady for calls your co-worker’s Park.
• The line/loop key for the parked call winks on (green) at your extension.
2.
If a call in System Park Orbits recalls, you see one of the following.
a.
If the extension that parked the call doesn’t have a name:
Park xx Recall
STA 301
b.
If the extension that parked the call has a programmed name:
Park xx Recall
300: Attendant
To Park or retrieve a call in Personal Park Orbit:
1.
Do one of the following.
a.
(Park only)
[Park]
[Park]
Select Park.
• You cannot use this procedure to retrieve a parked call.
[Pers]
[Personal]
• Select Personal Park.
• Dial the number of the extension at which you want to Park or retrieve
the parked call.
b.
• Press TRANSFER and dial **.
• Dial the number of the extension at which you want to Park the call.
- The line/loop key for the parked call winks on (green) at your extension.

NEC DSX Specifications