NEC DSX - Page 340

Single Line Telephones
310 ◆ Features DSX Software Manual
Group Call Pickup
1.
Lift the handset.
2.
Dial *#.
Hold
To retrieve a line on System Hold at a co-worker’s extension:
1.
Lift the handset.
2.
Dial *4.
3.
Dial the number of the line that is on Hold (e.g., 01 for line 1).
To place a call on Exclusive Hold:
1.
Hookflash and dial *7.
2.
Hang up.
• If the call is left on Exclusive Hold too long, it will recall to you.
• If you hang up without first dialing *7, the call will recall immediately.
• If you previously placed a call on Exclusive Hold or have a camped-on call waiting, dialing *7 will answer the
waiting call. See Split for more.
To retrieve a call from Exclusive Hold:
1.
Hookflash and dial *7.
Intercom
To place an Intercom call:
1.
Lift the handset.
2.
Dial the extension number.
• To call the operator, dial the operator s extension number or dial 0 or 01-04 (depending on how your system is
set up).
• If your call voice-announces the destination, you can dial 1 to force the call to ring.
To answer an Intercom call:
1.
Lift the handset.
Meet-Me Conference
To set up a Meet-Me Conference:
1.
Page the parties and announce the Meet-Me Conference code (#11 or #12).
• See Paging (page 259) for more on how to page your co-workers.
2.
Hang up, then lift the handset.