NEC DSX Software Manual

User Programmable Features
370 ◆ Features DSX Software Manual
Conditions
• None
Default Setting
• Extension 300 has its access level fixed at 5. (This means that by default only extension 300 can dial
#TD to change the system time and date.)
• All other extensions have access level 3.
Ringing Line Preference
#RLP
#757 #RLP + Y to enable or N to disable +
SPEAKER to exit.
2-5
Speed Dial, Personal
#SP
#77 #SP + Press bin key (for bins 701-710) or dial
the bin key (701-720) + HOLD + Dial outside
line (e.g., 1), Line group (e.g., 90-98), or ICM
for Intercom feature +
HOLD + Number to store
+ HOLD twice + Name + HOLD + Press another
bin key or SPEAKER to exit.
1-5
Speed Dial, System
#SP
#77 #SP + Dial System Speed Dial bin number
(e.g., 201) + HOLD + Dial outside line (e.g., 1),
Line group (e.g., 90-98), or INTERCOM for
Intercom feature + HOLD + Number to store +
HOLD twice + Name + HOLD + Dial another
System Speed Dial bin or SPEAKER to exit.
4 and 5
System Program Access #*#* #*#* + Enter programming password 3-5
Time and Date
#TD
#83 #TD + Enter time in 24-hour clock using hours
(2 digits), minutes (2 digits) and seconds (2 dig-
its) + HOLD + Enter date using month (2 digits),
day (2 digits) and year (4 digits) + HOLD +
SPEAKER to exit.
4 and 5
Intercom Voice Announce
(for incoming Intercom
calls)
#VA
#82 #VA + V for voice announce or R for ring +
SPEAKER to exit.
3-5
User Programmable Features
To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y, then
SPEAKER to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
the attendant.
Feature Mnemonic Numeric Operation Access Level

NEC DSX Specifications