NEC DSX Software Manual

Account Codes
16 ◆ Features DSX Software Manual
Setting Up Forced Account Codes
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes (enable Forced Account Codes), in 1412-04: Forced Account Codes (page 651) for the extension’s
Class of Service level, enter Yes.
3. If no (disable Forced Account Codes), 1412-04: Forced Account Codes (page 651) for the extension’s
Class of Service level, enter No.
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes:
- In 1412-06: Account Codes for Toll Calls Only (page 651), enter
Yes.
- In 1551-04: Account Code Toll Restriction Level (page 668), enter the Toll Level the system will
use to differentiate toll calls from local calls.
3. If no, in 1412-06: Account Codes for Toll Calls Only (page 651), enter No.
1. If yes, in 3111-01: Disable Forced Account Codes (page 817), enter Yes.
2. If no, in 3111-01: Disable Forced Account Codes (page 817), enter No.
Setting Up Verified Account Codes
1. In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.
2. If yes:
- In 1412-05: Verified Account Codes (page 651), enter Yes.
- In 36xx-AC Codes (Verified Account Codes Table) (page 854), enter codes into the Verified Account
Codes Table.
- If 1551-01: Dial # to Enter Account Codes (page 667) is enabled (Yes), do not enter # in any of
your Verified Account Codes.
3. If no, in 1412-05: Verified Account Codes (page 651), enter No.
1.
Should an extension have Forced Account Codes (i.e., be required to enter an Account Code
while placing an outside call)?
2. Should an extension have Forced Account Codes only for long distance (toll) calls?
3. Do you have specific lines that should never require users to enter a Forced Account Code?
1.
Should an extension be required to enter a Verified Account Code while placing an outside
call?

NEC DSX Specifications