NEC DSX Software Manual

Call Forward to a Mailbox
448 ◆ IntraMail Features DSX Software Manual
Conditions
• None
Default Setting
• Call Forwarding is allowed, but not set up for any extensions.
• Ring No Answer Call Forward occurs after 10 seconds.
Programming
1. In 1601-03: Call Forward No Answer Timer (page 670), program how long an unanswered call will ring
before forwarding.
- For type 2 (Not Answered) and type 6 (Busy or Not Answered) forwarding, an unanswered call will
forward after this interval.
- This timer applies to transferred outside calls, Direct Inward Lines, and Intercom calls.
- For more on timers that may affect Call Forwarding, see Call Forwarding (page 44).
Other Related Features
Features
None
IntraMail Features
Auto Attendant Do Not Disturb (page 427)
When enabled, Auto Attendant Do Not Disturb automatically sends all calls from the Automated
Attendant to the subscriber’s mailbox.
Extension Hunting to Voice Mail (page 478)
Extension Hunting to Voice Mail automatically sends calls to an extension’s mailbox without the user
having to set up Call Forwarding.
Message Forward (page 531)
A subscriber can forward a message in their Subscriber Mailbox to a co-worker.
Next Call Routing Mailbox (page 552)
The setting of the Next Call Routing Mailbox and Dialing Option options determine the digits a caller
can dial while listening to the recorded or default mailbox greeting.
1. Set how long an unanswered call will ring before forwarding.

NEC DSX Specifications