NEC DSX Software Manual

Dial Action Table
468 ◆ IntraMail Features DSX Software Manual
1. See Automated Attendant (page 433) for more.
2. In 4222-02: Time Limit for Dialing Commands (page 891), enter the timeout duration (0-99 seconds).
- By default, Automated Attendant callers have 5 seconds to dial commands.
3. If the caller waits too long to dial:
- When the associated Dial Action Table has a Timeout action programmed, the caller routes to that
destination.
- When the associated Dial Action Table does not have a Timeout action programmed, the Instruction
Menu repeats 3 times and then IntraMail hangs up.
Other Related Features
Features
None
IntraMail Features
Automated Attendant (page 433)
The Automated Attendant can automatically answer the telephone system’s incoming calls, play an
Instruction Menu message, and provide dialing options to callers.
Answer Tables (page 420)
Determines how the Automated Attendant answers outside calls on each line.
Call Routing Mailbox (page 450)
The mailbox associated with an Answer Table that specifies which dialing options (Dial Action Table)
and announcement are available to Automated Attendant callers.
Operation
N/A
4. To change the amount of time Automated Attendant callers have to dial options:

NEC DSX Specifications