NEC DSX - Page 614

Transfer to a Mailbox
584 ◆ IntraMail Features DSX Software Manual
Operation
Transferring Calls to a Mailbox
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To Transfer your active call to a mailbox:
Method A
(Ring first, then Transfer)
1.
Press TRANSFER.
2.
Dial the number of the mailbox to receive the Transfer.
• You can optionally press the DSS key for your co-worker.
• To transfer the call to your own mailbox, dial your extension number.
3.
Press V-MAIL and hang up.
• Voice mail will prompt your caller to leave a message.
• The caller will hear the entire mailbox greeting after the Transfer goes through.
4.
Press SPEAKER to hang up.
• To transfer a call to a co-worker’s mailbox from a single line telephone, use the following procedure:
Hookflash + Dial *8 + Dial the co-worker’s mailbox + Hang up.
Method B (Transfer without first ringing)
1.
Press TRANSFER.
2.
Press V-MAIL.
3.
Dial the number of the mailbox to receive the Transfer.
• You can optionally press the DSS key for your co-worker.
• Voice mail will prompt your caller to leave a message.
• The caller will hear the entire mailbox greeting after the Transfer goes through.
4.
Press SPEAKER to hang up.
Method C (Using a Call Coverage key)
1.
Press TRANSFER.
• If your extension has Hotline Automatic Transfer, skip this step.
2.
Press the Call Coverage key.
3.
Press V-MAIL.
• Voice mail will prompt your caller to leave a message.
• The caller will hear the entire mailbox greeting after the Transfer goes through.
4.
Press SPEAKER to hang up.
Method D (Using a Hotline key)
1.
Press the Hotline key.
2.
Press V-MAIL.
• Voice mail will prompt your caller to leave a message.
• The caller will hear the entire mailbox greeting after the Transfer goes through.
4.
Press SPEAKER to hang up.