NEC DSX - Page 651

13xx-Numbering
130x-Dial Plan
1301-Digits
DSX Software Manual System Options: 1001-1702 ◆ 621
System
1001-1702
IntraMail Features
• Flexible Mailbox Numbering Plan (page 488)
Options
• 1-3
Default
• See Default Dialing Plan (page 621).
Default Dialing Plan
Digit
Description Function Type Expected Digits
0
Use this option to define the Function Type and
Expected Digits for dial strings beginning with 0.
These strings are normally used for telephone sys-
tem operator access (1).
1 (Operator
Access)
3
1
Use this option to define the Function Type and
Expected Digits for dial strings beginning with 1.
These strings are normally reserved for Intercom
access (2).
2 (Extension
Access)
3
2
Use this option to define the Function Type and
Expected Digits for dial strings beginning with 2.
These strings are normally reserved for Intercom
access (2).
2 (Extension
Access)
3
3
Use this option to define the Function Type and
Expected Digits for dial strings beginning with 3.
These strings are by default assigned to Intercom
access (2).
2 (Extension
Access)
3
4
Use this option to define the Function Type and
Expected Digits for dial strings beginning with 4.
These strings are by default assigned to Direct
Line Access (2).
2 (Extension
Access)
3
5
Use this option to define the Function Type and
Expected Digits for dial strings beginning with 5.
These strings are normally reserved for Intercom
access (2).
2 (Extension
Access)
3
6
Use this option to define the Function Type and
Expected Digits for dial strings beginning with 6.
These strings are normally reserved for Intercom
access (2).
2 (Extension
Access)
3
7
Use this option to define the Function Type and
Expected Digits for dial strings beginning with 7.
These strings are normally reserved for Intercom
access (2).
2 (Extension
Access)
3