NEC DSX - Page 71

Call Coverage Keys
DSX Software Manual Features ◆ 41
Features
Programming
1. In 2121-[01 to 24]: Feature Key Codes (page 758):
- For an Immediate Ring Call Coverage key, assign key code 06.
- For a No Ring (Lamp Only) Call Coverage key, assign key code 07.
- For a Delay Ring Call Coverage key, assign key code 08.
2. In 2121-[01 to 24]: Feature Key Data (page 758), enter the destination the key will cover:
- Extension number
- Ring Group master number
- UCD Group master number
1. In 2402-[01-60]: DSS Console Key Codes (page 801):
- For an Immediate Ring Call Coverage key, assign key code 06.
- For a No Ring (Lamp Only) Call Coverage key, assign key code 07.
- For a Delay Ring Call Coverage key, assign key code 08.
2. In 2402-[01-60]: DSS Console Key Data (page 801), enter the destination the key will cover:
- Extension number
- Ring Group master number
- UCD Group master number
1. In 1604-02: Call Coverage Delay Ring Timer (page 678), set the timer to meet the site requirements.
1. Setting up Call Coverage keys on a keyset.
2. Setting up Call Coverage keys on a DSS Console.
3. For Delay Ring Call Coverage keys (if any), set the delay ring interval.