Caller ID
DSX Software Manual Features ◆ 67
Features
Operation
Clearing the Display
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To cancel (clear) the Caller ID display and return your phone to its normal display:
• You can only do this while you are on a call, not while your phone is ringing.
1.
Press CLEAR.
To turn the Caller ID display back on (after you press CLEAR to cancel it):
1.
Press CHECK.
Third Party Caller ID
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To display the Caller ID data for the third party’s call:
1.
Press INTERCOM + CHECK.
2.
Press one of the following keys for the call you want to check.
• You see Caller ID data for the line you select.
Press a line key while the call is ringing or connected to the third party.
Press a loop key while the call is ringing the third party.
Press a Hotline key while the call is connected to the third party.
Press a Call Coverage key while the call is ringing the third party.
3.
Hang up when you are done.
To Next Page
Loading...
