1 - 18 Multiline Terminal Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
LK 1 System Mode
LK 4 Transfer/Automated Attendant (A.A.)
Data
No.
Memory Block Name Default Value Programming Values
00 Tandem Transfer Automatic
Disconnect Time Selection
060
In minutes: 000~999
01 Automated Attendant First Digit
PBR Release Time Selection
20s
5s, 10s, 20s, 30s, 40s, 50s, 60s
02 Automated Attendant Transfer
Delayed Ringing Time Selection
∞
In seconds: 10, 20, 30,
∞
(No Limit)
03 Automated Attendant No Answer
Disconnect Time Selection
2m
1m, 2m, 3m, 4m
04 Tandem Transfer SMDR Print
Extension Assignment
999
2-digit = 00~99
3-digit = 000~999
4-digit = 0000~9999
05 Automatic Tandem Trunk by Night
Mode Selection
NO
YS, NO
08 Automated Attendant PBR Timeout
Response Selection
NORMAL
NORMAL, RELEAS
09 Automated Attendant PBR Start
Time Selection
FR
FR = Same Time as Greeting
AF = After Greeting
11 Automated Attendant Message
Day/Night Mode Selection
NO
YS, NO
12 Automated Attendant Message to
Tenant Assignment
00
Tenant Number 00 to 47
13 Automated Attendant Answer Delay
Time Assignment
04s
00~99s, per MSG 1~8
14 Automated Attendant Message
Access Code (1-Digit) Assignment
Refer to 1-4-14 Automated Attendant Message Access Code (1-Digit)
Assignment on page 2-141.
15 Automated Attendant Message
Access Code (2-Digit) Assignment
Refer to 1-4-14 Automated Attendant Message Access Code (1-Digit)
Assignment on page 2-141.
16 Automated Attendant Message
Repeat Selection
1
All messages
1, 2, 3, 4, 5, 6, 7, 8
17 Automated Attendant Delay
Announcement Hold Tone Selection
RBT
RBT, MOH
18 Automated Attendant Delay
Announcement Assignment
NONE (Not specified)
None, MSG1, MSG2, MSG3, MSG4,
MSG5, MSG6, MSG7, MSG8
To Next Page
Loading...
