NEC Electra Elite IPK - Page 50

Elite IPK Document Revision 1
Programming Manual 1 - 19
___________________________________________________________________________________
___________________________________________________________________________________
19
Automated Attendant 1
st
to 2
nd
Delay Announcement Interval Time
Selection
4m
0s, 10s, 20s, 30s, 1m, 2m, 3m, 4m, 5m,
10m, 20m.
20 Automated Attendant Delay
Announcement Disconnect Time
Selection
30s
0s, 10s, 20s, 30s, 1m, 2m, 3m, 4m, 5m,
10m, 20m
21 Automated Attendant Extension
Number Assignment
Not Specified
2-digit (10~99), 3-digit (100~999), or 4-digit
(1000~9999) extension numbers
Messages 1~8
22 Automated Attendant Direct
Extension Ring Assignment
Not Specified
2-digit (10~99), 3-digit (100~999), or 4-digit
(1000~9999) extension numbers
Messages 1~8
LK 1 System Mode
LK 4 Transfer/Automated Attendant (A.A.) (Continued)
Data
No.
Memory Block Name Default Value Programming Values
LK 1 System Mode
LK 5 SMDR/LCR
Data
No.
Memory Block Name Default Value Programming Values
02 SMDR Print Format ALL
ALL, MSK
13 Printer Connected Selection NO
NO, PC(Future), YS
14 Printer Line Feed Control Selection YS
YS, NO
25 SMDR Valid Call Time Assignment 040s
000~990s (in 10-second increments)
26 SMDR Incoming/Outgoing Print
Selection
OUT
ALL, OUT, INC