3 - 40 Advanced Applications
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
H
Trunk Group or Route Advance Blocks are specified in TG/
RAB.
H
Delete digits specifies the number of digits to delete from the
first dial when using PRT.
H
PreDigits controls whether digits that are specified in pre-digit
tables are dialed before the International or Operator code.
H
When TG/RAB is not assigned, outgoing calls cannot be made.
H
When an unassigned OCC number is dialed, route selection is
bypassed.
3.4.3 Operator Call Time Out Table Example
This table specifies a timeout (0~9 seconds) that is used to
distinguish between 0 and 00 of an Operator Call.
OCC Table Example
Tables (64)
01~16 for
each Class
OCC Dial Dial Priority TG/RAB
Delete
Digits
PreDigits
Add/Not
Add
Table 1
101
XXX
X
(X = 0~9)
101
0288
0- 1
RAB 15 8 Not Add
2 None Not Add
00 1 RAB 16 9 Not Add
2 None Not Add
011 1 RAB 3 10 Not Add
2 None Not Add
0N 1 RAB 4 10 Not Add
2 None Not Add
1N 1 RAB 5 10 Not Add
(N = 2~9) 2 None Not Add
NX 1 RAB 6 9 Not Add
(X = 0~9) 2 None Not Add
# 1 RAB 7 8 Not Add
2 None Not Add
To Next Page
Loading...
