Elite IPK Document Revision 1
Programming Manual A - 3
___________________________________________________________________________________
___________________________________________________________________________________
Second Delay
Announcement
Repeat Interval
Time Selection
1-1-75 The time (seconds) to repeat
the Second Delay
Announcement.
020
∞
Delayed Ringing
Time Assignment
(CO)
1-1-77 The time for delayed ringing on
incoming outside line calls.
00s 15s 99s
ISDN DTMF
Duration/Interdigit
Selection
1-1-80 The tone duration/interdigit
time (milliseconds) of DTMF
signals.
70/60 100/70 900/200
ISDN Dial Interval
Time Selection
1-1-81 The time between each digit
dialed.
2s 4s 32s
Internal Paging
Timeout Selection
1-2-00 The time allowed for paging. 90s 90s
∞
Automatic Callback
Release Time
Selection
1-2-02 Time allowed before Automatic
Callback is automatically
canceled.
30s 30m 30m
Call Forward - No
Answer Time
Selection
1-2-22 The time before ICM or Trunk
calls are forwarded when there
is no answer.
4s 8s 60s
System Call Park
Recall Time
Selection
1-2-23 Time (minutes) before a parked
call recalls to the station that
parked the call.
0.5 1.0 10.0
Delayed Ringing
Time Assignment
(ICM)
1-2-26 The delayed ringing time on
incoming internal calls.
00 10s 99
PS Out of Area
Time Assignment
1-2-30 The retry time when PS is Out
of Area.
00 08s 99
Bounce Protect
Time Selection
1-3-01 The time for detecting a valid
off-hook that is long enough to
prevent unintentional bounce
as an off-hook indication from a
Single Line Telephone or Voice
Mail System.
0ms 300ms 1500ms
First Digit PBR
Release Time
Selection
1-3-03 The time that a receiver is
connected when a DTMF
Single Line Telephone user is
dialing.
10s 10s 60s
Table A-1 Function Time Chart (Continued)
Time
Memory
Block
Definition
Value
Minimum Default Maximum