2 - 22 Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1 Elite IPK
Notes
1. One or more tenants can be enabled to use each group.
2. Use this Memory Block to assign which tenants use each group.
3. When speed dial is set to 1000, 900~999 cannot be restricted.
4. The X in each Speed Dial Buffer No. is displayed even when it is not entered.
5. Tenant numbers 00~07 are assigned to Flexible Line keys on the first page. Tenant numbers 08~15 are assigned
to the Flexible Line keys on the second page. The tenant number corresponding to Flexible Line key 1 of the
current page is displayed under Starting Tenant No. In all cases, each page is represented by eight line keys.
To Next Page
Loading...
