Parker 590+ series - Page 295

Parameter Specification Tables C-5
DC590+ Series DC Digital Drive
Tag Mn MMI Block Name MMI Parameter Name Minimum Maximum Default Units Range Notes
84 cc SEQUENCING DRIVE ENABLE 0 1 0 V0 W4
85 cd RAMPS RAMP OUTPUT 0.00 0.00 0.00 % V1 W4
86 ce SETPOINT SUM 1 SPT SUM OUTPUT 0.00 0.00 0.00 % V1 W4
87 cf CURRENT LOOP POS. I CLAMP 0.0 0.0 0.0 % V1 W4
88 cg CURRENT LOOP NEG. I CLAMP 0.0 0.0 0.0 % V1 W4
89 ch SPEED LOOP SPEED DEMAND 0.00 0.00 0.00 % V0 W4
90 ci CURRENT LOOP BIPOLAR CLAMPS 0 1 0
0: DISABLED
1: ENABLED
V1 W0
91 cj STOP RATES PROG STOP I LIM 0.00 200.00 100.00 % V0 W0
92 ck ALARMS ENCODER ALARM 0 1 0
0: ENABLED
1: INHIBITED
V0 W0
93 cl CURRENT PROFILE IMAX BRK1(SPD1) 0.0 200.0 200.0 % V0 W1
94 cm AUX I/O AUX DIGOUT 1 0 1 0
0: OFF
1: ON
V0 W0
95 cn AUX I/O AUX DIGOUT 2 0 1 0
0: OFF
1: ON
V0 W0
96 co AUX I/O AUX DIGOUT 3 0 1 0
0: OFF
1: ON
V0 W0
97 cp LINK 13 SOURCE TAG -1276 1276 77 V0 W2
98 cq LINK 14 SOURCE TAG -1276 1276 122 V0 W2
99 cr LINK 15 SOURCE TAG -1276 1276 125 V0 W2
100 cs DEADBAND INPUT 1 -200.00 200.00 0.00 % V1 W0
102 cu LINK 20 DESTINATION TAG 0 1276 90 V0 W2
103 cv DIGITAL INPUT 1 VALUE FOR TRUE -300.00 300.00 0.01 % V0 W0
104 cw DIGITAL INPUT 1 VALUE FOR FALSE -300.00 300.00 0.00 % V0 W0
105 cx LINK 21 DESTINATION TAG 0 1276 118 V0 W2
106 cy DIGITAL INPUT 2 VALUE FOR TRUE -300.00 300.00 0.01 % V0 W0
107 cz DIGITAL INPUT 2 VALUE FOR FALSE -300.00 300.00 0.00 % V0 W0
108 d0 LINK 22 DESTINATION TAG 0 1276 119 V0 W2
109 d1 DIGITAL INPUT 3 VALUE FOR TRUE -300.00 300.00 0.01 % V0 W0
110 d2 DIGITAL INPUT 3 VALUE FOR FALSE -300.00 300.00 0.00 % V0 W0
111 d3 ALARMS 5703 RCV ERROR 0 1 0
0: ENABLED
1: INHIBITED
V0 W0
112 d4 ALARMS STALL TRIP 0 1 0
0: OK
1: FAILED
V1 W4