Parker AC30 series User Manual

C-10 Parameter Reference
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Link to digital output to send command to close external pre charge
AFE Ext PCR Closed
1691 Parameters::Regen Control::AFE FALSE ALWAYS
Link to digital input to provide information if external pcr is closed.
AFE Sync Frequency
1703 Monitor::Regen Control
Parameters
::Regen Control::AFE
Hz NEVER
Mains frequency as measured by the AFE module.
AFE Sync Angle
1718 Parameters::Regen Control::AFE deg NEVER
Mains angle as measured by the AFE module.
AFE PLL Kp
1694 Parameters::Regen Control::AFE 5.48 0.00 to 30.00 ALWAYS
PLL proportional gain.
AFE PLL Ti
1695 Parameters::Regen Control::AFE 0.0318 0.0000 to 3.0000 ALWAYS
PLL integral term.
AFE VDC Kp
1707 Parameters::Regen Control::AFE 8.27 0.00 to 300.00 ALWAYS
DC link voltage loop proportional gain.
AFE VDC Ti
1708 Parameters::Regen Control::AFE 0.0319 0.0000 to 3.0000 ALWAYS
DC link voltage loop integral term.
AFE VDC Demand
1711 Same as PNO 1693 720 340 to 820 V ALWAYS

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485