Parker AC30 series User Manual

Parameter Reference C-61
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
The product code string that may be used to order an equivalent Control Module, excluding options.
Control Module Serial
0977
Parameters::Device Manager::Drive info NEVER
The serial number of the Control Module.
Comms Option Pcode
1121
Parameters::Device Manager::Drive info NEVER
The product code string that may be used to order an equivalent Communications Option, (only visible when a Communications Option
is selected).
Comms Option Serial
1129
Parameters::Device Manager::Drive info NEVER
The serial number of the fitted Communications Option, (only visible when a Communications Option is selected).
IO Option Pcode
1125
Parameters::Device Manager::Drive info NEVER
The product code string that may be used to order an equivalent IO Option, (only visible when an IO Option is selected).
IO Option Serial No
1134
Parameters::Device Manager::Drive info NEVER
The serial number of the fitted IO Option, (only visible when an IO Option is selected).
IO Option SW Version
1254
Parameters::Device Manager::Drive info NEVER
For intellilgent IO options this parameter shows the version of the firmware running in the option.
Drive Diagnostic
0688
Parameters::Device Manager::Drive info
0:OK
1:STACK NOT CONNECTED
2:STACK DATA CORRUPT
3:UNKNOWN STACK
4:STACK MISMATCH
NEVER

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485