Parker AC30 series User Manual

C-98 Parameter Reference
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Digout Invert 1335
Setup::Inputs and Outputs::Base IO
Parameters::Inputs And Outputs::IO
Configure
0000 ALWAYS
Inverts the digital outputs from the drive as a 16-bit word. The bits within the word may be accessed individually, or the entire word may
be accessed as a group.
Bit
Signal Name
Terminal
Comment
PNO for individual bit access
0
Inv Digout 01
X12.1
Common terminal with digital input 4
1336
1
Inv Digout 02
X12.2
Common terminal with digital input 5
1337
2
Inv Digout 03
X12.3
Common terminal with digital input 6
1338
3
Inv Digout 04
X12.4
Common terminal with digital input 7
1339
4
Inv Relay 01
X14.1&2
1340
5
Inv Relay 02
X14.3&4
1341
8
Inv Digout 11
X20.1
GPIO option
1344
9
Inv Digout 12
X20.2
GPIO option
1345
10
Inv Digout 13
X20.3
GPIO option
1346
11
Inv Digout 14
X20.4
GPIO option
1347
14
Inv Relay 11
X23.1 & 2
GPIO option
1350
15
Inv Relay 12
X23.3 & 4
GPIO option
1351

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485