QNAP QTS 4.5 Series User Manual

Note
The administrator account cannot be deleted.
3. Click Delete.
A warning message appears.
4. Click Yes.
Domain User Groups
A domain user group is a collection of domain users with the same access rights to files and folders. Domain
administrators can create domain user groups to improve security for domain users.
Default Domain User Groups
• Allowed RODC Password Replication Group
• Certificate Service DCOM Access
• Denied RODC Password Replication Group
• Enterprise Read-Only Domain Controllers
• Incoming Forest Trust Builders
• Network Configuration Operators
• Pre-Windows 2000 Compatible Access
• Read-Only Domain Controllers
• Terminal Server License Servers
• Windows Authorization Access Group
Creating a Domain User Group
1. Go to Control Panel > Privilege > Domain Controller > Groups .
2. Click Create a User Group.
The Create a User Group wizard appears.
3. Specify a user group name between 1 and 128 ASCII characters that does not begin with:
• Spaces
• The following characters: - # @
4. Click Next.
5. Optional: Add users to the group.
a. Select Yes.
b. Click Next.
c. Select the users you want to add to the group.
d. Click Next.
QTS 4.5.x User Guide
Privilege Settings 112

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.