EasyManuals Logo

QNAP QTS 4.5 Series User Manual

QNAP QTS 4.5 Series
575 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #434 background imageLoading...
Page #434 background image
Setting Description
Secondary DNS Server Specify a secondary DNS server for the DHCP
server.
Important
QNAP recommends specifying at least
one DNS server to allow URL lookups.
WINS Server Specify the WINS server IP address.
Tip
Windows Internet Naming Service
(WINS) converts computer names
(NetBIOS names) to IP addresses,
allowing Windows computers on a
network to easily find and communicate
with each other.
DNS Suffix Specify the DNS suffix.
Tip
The DNS suffix is used for resolving
unqualified or incomplete host names.
TFTP Server Specify the public IP address for the TFTP server.
Tip
QTS supports both PXE and remote
booting of devices.
Boot File Specify location and file name of the TFTP server
boot file.
Tip
QTS supports both PXE and remote
booting of devices.
10. Click Apply.
DHCP Clients
A DHCP client is a network device using DHCP service to obtain network cofiguration parameters such as an
IP address from a DHCP server. When a DHCP client sends a broadcast message to locate a DHCP server,
the DHCP server provides configuration parameters (IP address, MAC address, domain name, and a lease
for the IP address) to the client.
Physical Adapter DHCP Client
Enabling a DHCP IPv4 address allows the device to automatically acquire an IPv4 address for a specific
physical adapter from a DHCP server. The physical adapter is assigned an IP address by the DHCP server
for a predefined lease time.
Note
For details on obtaining a DHCP provided IP address, see Configuring IPv4 Settings.
QTS 4.5.x User Guide
Network & Virtual Switch 433

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP QTS 4.5 Series and is the answer not in the manual?

QNAP QTS 4.5 Series Specifications

General IconGeneral
Operating SystemQTS 4.5 (Based on Linux)
File SystemEXT4
Supported RAID LevelsRAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking ProtocolsTCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management InterfaceWeb-based GUI
Supported ProtocolsSMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot SupportYes
Virtualization SupportYes
Backup SolutionsHybrid Backup Sync
Security FeaturesAES 256-bit encryption, Antivirus, IP Blocking
Mobile AppsQfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage CapacityVaries by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.

Related product manuals