EasyManuals Logo

QNAP QTS 4.5 Series User Manual

QNAP QTS 4.5 Series
575 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #218 background imageLoading...
Page #218 background image
Action Description
Enable SED Security Add user password and enable the ability to lock and
unlock the volume or pool.
Removing a Locked SED Storage Pool or Static Volume
1. Go to Storage & Snapshots > Storage > Storage/Snapshots .
2. Select a locked SED storage pool or static volume.
3. Click Manage, and then select Remove.
The Removal Wizard window opens.
4. Select a removal option.
Option Description
Enter the password of the pool
Enter the password of the volume
QTS unlocks the SED disks in the storage pool or
static volume, and then deletes all data.
Forget password QTS removes the storage pool or static volume
without unlocking the disks. The SED disks cannot
be used again until you perform one of the following
actions:
• Unlock the disks. Go to Disks/VJBOD, click
Recover, and then select Attach and Recover
Storage Pool.
• Erase the disks using SED erase.
5. Click Apply.
SED Erase
SED Erase erases all of the data on a locked or unlocked SED disk and removes the SED security
password.
Erasing a Disk Using SED Erase
1. Go to Storage & Snapshots > Storage > Disks/VJBOD .
2. Select an SED disk.
3. Click Actions, and then select SED Erase.
The SED Erase window opens.
4. Enter the disk's PSID.
Tip
The PSID can usually be found on the front of the disk.
5. Click Apply.
Expansion Units
Expansion units are designed to expand the storage capacity of a QNAP NAS by adding extra drive bays.
Expansion units can be connected to the NAS using USB, Mini-SAS, Thunderbolt, or other cable type.
QTS 4.5.x User Guide
Storage & Snapshots 217

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP QTS 4.5 Series and is the answer not in the manual?

QNAP QTS 4.5 Series Specifications

General IconGeneral
Operating SystemQTS 4.5 (Based on Linux)
File SystemEXT4
Supported RAID LevelsRAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking ProtocolsTCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management InterfaceWeb-based GUI
Supported ProtocolsSMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot SupportYes
Virtualization SupportYes
Backup SolutionsHybrid Backup Sync
Security FeaturesAES 256-bit encryption, Antivirus, IP Blocking
Mobile AppsQfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage CapacityVaries by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.

Related product manuals