Field User Action
Enable secure connection (HTTPS) Select this option to allow HTTPS connections.
a. Select Enable secure connection (HTTPS).
b. Select a TLS version.
Warning
Selecting the latest TLS version may decrease
compatibility for other clients in your system.
c. Specify a port number.
d. Optional: Select Force secure connection (HTTPS) only to
require all users to connect to the NAS using only HTTPS.
Do not allow QTS embedding in
IFrames
a. Select this option to prevent websites from embedding QTS
using IFrames.
b. Click Allowed Websites to allow a specific website to embed
QTS in IFrames.
c. The Allowed Websites window appears.
d. Optional: Click Add to add a website to the list.
The Add Host Name window appears.
e. Specify a host name.
f. Click Add.
The host name is added to the allowed websites list.
g. Optional: Select a website, and then click Delete to delete a
website from the list.
h. Click Apply.
3. Click Apply.
Configuring Time Settings
Important
You must configure the system time correctly to avoid the following issues.
• When using a web browser to connect to the NAS or save a file, the displayed time of
the action is incorrect.
• Event logs do not reflect the exact time that events occurred.
• Scheduled tasks run at the wrong time.
1. Go to Control Panel > System > General Settings > Time .
2. Select a time zone.
3. Specify the date and time format.
4. Select the time setting.
QTS 4.5.x User Guide
System Settings 34
To Next Page
Loading...
Need help?
General
