QNAP QTS 4.5 Series User Manual

5. Enable or disable the following permissions for the owner, group, and other users on the list.
Permission Description
Read Only Allows a user to view the folder.
Read/Write Allows a user to view and make changes to the folder.
Deny Denies a user any access to the folder
Tip
You can click + to add users to the list and - to remove users from the list.
6. Optional: Select the access right for guest users.
7. Optional: Specify the ownership of the folder.
a.
Click .
b. Select a user.
c. Click Set.
8. Optional: Enable one or more of the following settings.
• Only the owner can delete the contents
• Only admin can create files and folders
• Apply changes to files and subfolders
• Apply and replace all existing permissions
9. Click Apply.
Viewing Qsync Folders
1. Open File Station.
2. On the left panel, click Qsync.
File Station displays the list of team folders shared by other NAS users.
Managing Share Links
1. Open File Station.
2. On the left panel, click Share link management.
File Station displays the list of shared files and folders.
Note
File Station automatically checks and deletes expired links.
3. Select an item from the list and then perform one of the following tasks.
QTS 4.5.x User Guide
File Station 155

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.