QNAP QTS 4.5 Series User Manual

Method Steps
License Manager a. Open your web browser.
b. Go to https://license.qnap.com.
c. Sign in with your QNAP ID.
d. Locate a license from the license list.
e.
Click .
The Activate License window appears.
f. Select Activate using myQNAPcloud Link (Requires installation of
myQNAPcloud Link.
g. Click Next.
h. Select a device.
i. Specify your credentials on the device.
j. Click Allow.
License Center activates the license.
A confirmation message appears.
k. Click Close.
The license appears on the list of active licenses.
Activating a License Using a Product or License Key
Before activating your license, ensure that your device is connected to the internet.
Important
To activate a license using a product key, you need to sign in with your QNAP ID.
1. Open License Center.
2. Go to My Licenses.
3. Click Add.
4. The License Activation window appears.
5. Click manually activate a license.
6. Select Use a product or license key.
7. Click Next.
8. Specify the key.
Key Description
Product key The product key is purchased together with the product from either
QNAP or an authorized reseller. The product key is normally printed on
the product package.
QTS 4.5.x User Guide
Licenses 473

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.