QNAP QTS 4.5 Series User Manual

20. Select a follow-up action.
Action Description
Create New Storage Pool Creates a storage pool using the VJBOD disk
Create New Static Volume Creates a static volume using the VJBOD disk
Recover Existing Data Restores a static volume or storage pool that was
previously created on the VJBOD disk
Do nothing Ends the creation process. You can configure the
VJBOD disk later.
Tip
To create a storage pool or static
volume on a VJBOD disk later, go
through the normal steps of creating a
storage pool or static volume. Then on
the disk selection screen, under
Enclosure Unit select Virtual JBOD.
21. Click Finish.
VJBOD Management
Virtual JBOD Overview
To view an overview of all VJBOD disks including information on their source remote NAS devices, go to
Storage & Snapshots > Storage > Disks/VJBOD , click VJBOD/VJBOD Cloud, and then select VJBOD
Overview.
VJBOD Disk Actions
Go to Storage & Snapshots > Storage > Disks/VJBOD , select a VJBOD disk, and then click Action.
Action Disk Status Description
New Volume Free Creates a new static volume on
the VJBOD disk
NAS Detail Any Displays information about VJBOD
disk's remote NAS
Remote Log Any Displays the event log on the
VJBOD disk's remote NAS
QTS 4.5.x User Guide
Storage & Snapshots 279

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.